Vacuum test is usually carried out with a vacuum gauge. Before testing, it is necessary to ensure that the cryogenic liquid tank is in an inactive state and the internal liquid has been emptied. Then connect the vacuum gauge to the vacuum detection port of the tank body and perform the test according to the operating instructions of the vacuum gauge. During the test, pay attention to the changes in the vacuum gauge readings and record the vacuum value after the final stabilization.
Testing process
Preliminary preparation: Determine the testing requirements, select appropriate testing methods and instruments, and ensure that the testing instruments are in good condition.
On-site testing: Operate according to the selected testing method and record the test data.
Data analysis: Process and analyze the test data to determine whether the vacuum degree of the tank is qualified.
Result report: Prepare a test report, and record the test process, data and conclusions in detail.
Subsequent processing: Take corresponding maintenance measures according to the test results to ensure the safe and stable operation of the tank.

