
The process flow of natural gas liquefaction plant mainly includes natural gas purification, liquefaction, storage and other links. The specific steps are as follows:
Natural gas purification:
- Pretreatment: The original natural gas is compressed to the specified pressure by a compression pump, and chemical agents are added for deacidification, desulfurization and other treatments.
- Dehydration treatment: The pretreated natural gas is sent to the dehydration tower, and the water vapor is condensed into liquid water by decompression.
- Decooling treatment: The dehydrated natural gas is heat exchanged and cooled to about -40℃ to remove most of the water.
- Deacidification, desulfurization, dehydration: MDEA is used to remove acidic gases (such as carbon dioxide and hydrogen sulfide), molecular sieve dehydration, activated carbon to remove mercury, and low-temperature washing to remove heavy hydrocarbons.
Natural gas liquefaction:
- Precooling treatment: The purified natural gas is compressed to a higher pressure by a compression pump, and then enters the cooling tube bundle for precooling treatment.
- Liquid treatment: A refrigerator is used to deeply cool the gas, and the liquefied natural gas is stored in a steel liquefied natural gas tank.
- Liquid and gas storage:
- The liquefied natural gas tank adopts a multi-layer insulation structure to reduce the heat load and prevent the impact of mechanical vibration on the tank.
Main equipment
- Raw gas compressor: used to compress natural gas to a specified pressure.
- Chemical agent injection system: used for deacidification, desulfurization and other treatments.
- Dehydration tower: condense water vapor into liquid water and discharge it through decompression.
- Cooling tube bundle and refrigerator: used for gas pre-cooling and deep cooling.
- LNG tank: used to store liquefied natural gas.
Technical features and application range
- Applicable gas volume: 1×10^4 Nm³/d ~ 500×10^4 Nm³/d.
- LNG temperature: can be as low as -162℃.
- Applicable gas source pressure: normal pressure ~ 8.0MPa.
- Large flexibility in device operation: can operate stably and efficiently within the range of 50-120%.
- High localization rate: except for a small number of cryogenic pumps and valve groups, all domestic tooling is used to ensure the construction period.

